High Quality American Standard Qd Bush

• Customization: Available
• Standard Or Nonstandard: Standard
• Shaft Hole: 8-24
• Model NO.: H JA SH SDS SD SK SF E F J M N
• Torque: >80N.M
• Bore Diameter: 19mm
• Speed: 4000r/M
• Structure: Rigid
• Material: Cast Steel
• Type: Bushing
• Transport Package: Custermizable
• Specification: H JA SH SDS SD SK SF E F J M N
• Trademark: OKE
• Origin: China

Product Description

Material: Ductile iron,steel
Size: H,JA,SH,SDS,SD,SK,SF,E,F,J,M,N
We can make these QD bush according to your special requirement also.
If you need more detail.welcome inquire us.
Mouting
1.Be sure the tapered cone surfaces of the bushing and the inside of the driven products are clean and gree to anti-seize lubricants
2.Slide QD bushing on shaft,flange end first .Assemble key.
3.Position QD bushing on shaft.Tighten set screw over key "hand tight" with standard wrench only. Do not use excessive force.
4.Slide large end of sheave,pulley or sprocket taper bore into position over cone aligning drilled bolt holes in sheave,pulley or sprocket with tapered holes in flange of bushing.
5.Tighten pull-pu bolts alternately and evenly to tightness indicated in torque table on back.